How To Clean Nebulizer Tube. Disconnect the tubing from the air outlet on the compressor. • rinse, shake off excess water, and place parts on a clean towel to air dry.
Place the cup in a clean, dry location to let it air dry. Mix a solution of 1 part distilled white vinegar and 3 parts warm tap water in a clean bowl. Make sure your hands are clean, then disassemble your nebulizer and rinse all the pieces with warm water.
Table of Contents
There Is No Need To Clean The Tubing That.
After 30 minutes, rinse and air. It’s always a good idea to have an extra nebulizer cup , spare tubing , and aerosol mask or mouthpiece on hand, just so your treatment schedule won’t be interrupted if you do notice a. Rinse the nebulizer parts under warm running water for 1 minute.
There Is No Need To Clean The Tubing That Connects The Nebulizer To The Air Compressor.
Allow the water to run through for several minutes, until the water emerging from the end of the tube is clear of suds and holds no scent of bleach. In a clean bowl, prepare a cleaning solution consisting of one part white vinegar and two parts sterile water. Shake off the excess water, and lay the components on a paper towel.
Clean The Nebulizer Chamber, Mouthpiece And Tubing After Each Use.
Run the nebulizer machine for 10 to 20 seconds to dry the inside of the nebulizer thoroughly. Make sure the nebulizer is completely dry before storing it in a sealed plastic bag. • rinse, shake off excess water, and place parts on a clean towel to air dry.
Do Not Wash Or Rinse The Tubing Or The Nebulizer Compressor.
Throw the solution out afterwards. Soak the aforementioned parts in the solution for 30 minutes. Cleaning your nebulizer on a consistent basis gives you a chance to carefully inspect the parts and make sure they haven’t become too worn to remain useful.
Note That This Cleaning Solution Can Never Be Reused.
Remember that silicone is very heat resistant so it doesn’t matter how hot you get the water. Do not wash nebulizer tubing or compressor, always check your instructions. Remove the cap of the medication cup.