Toilet Seat Cover Dispenser Height. The seat height of a water closet above the finish floor shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured to the top of the seat. Height 13 1/4 holds 125 covers :
When a dispenser can’t be installed in the recommended. Hand dryer of paper towel dispenser 3. To prevent causing injury or imbalance, the plumbing can be located behind walls or to the side of the toilet;
Table of Contents
Toilet Seat Cover Dispenser 6.
To 19 max measured from floor to top of seat. Made from black abs plastic, this is a durable dispenser that will provide a clean image for any washroom. The seat height of a water closet above the finish floor shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured to the top of the seat.
Mounting Height Is At 44 Inches (1120) Maximum Above The Finish Floor But The 2009 Icc/Ansi Standards Require That Soap Dispenser Controls, And Faucets, That Serve Certain Accessible Lavatories Incorporate “Enhanced Reach Ranges”, Determined By Scoping Requirements Need To Be Installed With A Reach Depth Of 11 Inches (280Mm) Maximum.
Seats shall not be sprung to return to a lifted position. Mounts with two screws (not included). The tork toilet seat cover dispenser is the optimal solution for any size washroom.
The Impact 1120 Black Plastic Toilet Seat Cover Dispenser Mounts On The Wall And Can Hold Up To 500 Toilet Seat Covers.
Or if approved by the local authority having jurisdiction, provide a toilet seat lid. Dispenser fills from bottom through concealed opening. Toilet paper dispensers shall comply with 309.4 and shall be 7 inches (180 mm) minimum and 9 inches (230 mm) maximum in front of.
Smooth Cover Is Easy To Clean And Maintain.
A functional and modern design, this dispenser reduces consumption and waste with its single sheet dispensing. Compliant ada dispenser heights and locations. Place the dispenser between toilet and lavatory, with top set at 2 feet to 6 inches above floor.
• Toilet Seats Cannot Be Sprung.
The tork toilet seat cover dispenser is the optimal solution for any size washroom. Height 13 1/4 holds 125 covers : Made from white abs plastic, this is a durable dispenser that will provide a bright, clean image for any washroom.